HRP-POA 50G
- Manual Quote
| Wheel Ø [mm] | 50 |
|---|---|
| Wheel width [mm] | 24 |
| Load capacity at 1 km/h [kg] | 250 |
| Bearing type | plain bore |
| Total height [mm] | 84 |
| Total height max. [mm] | 88 |
| Displacement [mm] | 4 |
| Plate dimensions [mm] | 73 x 73 |
| Bolt hole spacing [mm] | 58 x 58 |
| Bolt hole Ø [mm] | 7 |
| Offset [mm] | 38 |
Description
Product Introduction
The HRP and HRIG brackets are made from die-cast aluminium and have an integrated hard rubber truck lock and an adjustment wheel. The levelling castor can be attached to the application using a steel top plate fitting (HRP series) or a bolt hole female thread (HRIG series). The adjustment wheel integrated into the castor is used to make height adjustments. The HRSP series is recommended if castors with a higher load capacity are required.
hrp-poa-hrig-poa – Specifications (see the parameter table above for this model)
