LE-TPA 127G
- Manual Quote
| Wheel Ø [mm] | 125 |
|---|---|
| Wheel width [mm] | 32 |
| Load capacity at 4 km/h [kg] | 125 |
| Bearing type | plain bore |
| Total height [mm] | 150 |
| Plate dimensions [mm] | 100 x 85 |
| Bolt hole spacing [mm] | 80 x 60 |
| Bolt hole Ø [mm] | 9 |
| Offset [mm] | 38 |
Description
Product Introduction
Wheels and castors in the TPA series have a tread of high-quality thermoplastic rubber-elastomer (TPE) and an impact-resistant polypropylene wheel centre. The grey tread with a hardness of 85 Shore A is chemically bonded to the wheel centre. The wheels are non-marking and characterised by low rolling and swivel resistance.
The oil in the tread may cause some discolouration on sensitive surfaces. In such cases, the VPP , POES , POEV oder PATH series can be used as an alternative.
standard-rubber-tpa – Specifications (see the parameter table above for this model)
