LEX-POTHS 200XK
- Manual Quote
| Wheel Ø [mm] | 200 |
|---|---|
| Wheel width [mm] | 50 |
| Load capacity at 4 km/h [kg] | 300 |
| Bearing type | ball bearing |
| Total height [mm] | 235 |
| Plate dimensions [mm] | 140 x 110 |
| Bolt hole spacing [mm] | 105 x 75–80 |
| Bolt hole Ø [mm] | 11 |
| Offset [mm] | 54 |
Description
Product Introduction
The tread of the POTHS series is made of a blue thermoplastic polyurethane (TPU) with a hardness of 80 Shore A. This is cast onto an impact-resistant nylon wheel centre. The tyre is non-marking and non-staining. It is also very gentle on the floor and quiet. The wheels in the POTHS series provide a very high level of operational comfort, alongside extremely low rolling and swivel resistance.
POTHS castors are completely corrosion-resistant and ideally suited for wet areas when combined with corrosion-resistant and vibration-ground finished chromium-nickel brackets, a corrosion-resistant roller or ball bearing and corrosion-resistant axle material. The POTHS series is therefore the best solution when handling heavy loads in sensitive hygienic areas while reducing noise levels and providing exceptionally high operational comfort.
stainless-steel-poths – Specifications (see the parameter table above for this model)
