LSFN-SE 300K
- Manual Quote
| Wheel Ø [mm] | 300 |
|---|---|
| Wheel width [mm] | 75 |
| Load capacity at 4 km/h [kg] | 1,000 |
| Spring force [kg] | 850 |
| Pretensioning force [kg] | 100 |
| Spring travel [mm] | 45 |
| Total height [mm] | 395 |
| Plate dimensions [mm] | 200 x 160 |
| Bolt hole spacing [mm] | 160 x 120 |
| Bolt hole Ø [mm] | 14 |
| Offset [mm] | 120 |
Description
Product Introduction
In the SE series, the high-quality elastic solid rubber tread is vulcanised onto the triple welded pressed steel wheel centre with a tubular steel hub. A nylon wheel centre is used for smaller diameters. The wheels have a hardness of 65° Shore A and provide a very high level of operational comfort, good floor preservation and low-noise operation. Blickle’s standard range of SE wheels is available either with the spring-loaded brackets in the LSFN series with steel spring or the LSFE series with a polyurethane-elastomer.
The spring-loaded SE castors are used specifically for the transport of heavy and fragile loads, such as ceramic goods. The series is frequently used for tugger trains.
spring-damping-se – Specifications (see the parameter table above for this model)
