BLICKLE or DARCOR casters: define the environment first, then calculate the load
Caster selection starts with the environment (cleanroom, ESD, heavy-duty, general industry), then load: wheel load = total weight x safety factor / 3. A sizing path using the BLICKLE and DARCOR ranges as examples.
Short answer: the two brands are not "better or worse" - they take different routes. BLICKLE is a German full-range caster line covering light instruments through heavy equipment in one continuum; DARCOR is known for industrial casters with a strong conductive/anti-static direction. Step one of selection is not comparing brands - define the environment, calculate the load, and only then land on a series.
Step 1: the environment sets the direction
Four typical environments demand completely different things: 1) cleanrooms - wheels must not shed particles; prefer soft polyurethane or thermoplastic treads; 2) electronics/pharma ESD areas - the whole wheel must stay within the conductive resistance range; choose a conductive series per the OEM catalogue (the low-profile twin-wheel DARCOR XD series suits precision equipment; for ESD areas confirm the conductive variant) and verify resistance against the acceptance standard; 3) heavy equipment moving - load capacity first; top-plate thickness and wheel diameter determine service life; 4) general industrial floors - balance wear resistance and cost. Environment fit of each series follows the original manufacturer data.
Step 2: calculate the load
Use the conservative formula: wheel load = (equipment weight + max payload) x safety factor / 3. Divide by 3, not 4, because on uneven floors or at door-sill impacts only three of four wheels carry load at once; the safety factor is typically 1.3-1.5. Match the resulting wheel load against the series capacity table - in the BLICKLE range, light instrument series such as TPA 75/8G differ visibly in bracket construction and wheel diameter from heavy series; never let a light caster carry a heavy load. Check parameters line by line, per the original manufacturer data.
Step 3: diameter and tread
Within one capacity class, a larger wheel rolls easier and handles sills and floor joints better but raises the equipment center of gravity; tread material decides noise, floor marking and chemical resistance. Together with load, these settle the final size; the BLICKLE and DARCOR series pages list capacity tables and tread codes - verify line by line before ordering.
If the environment class or load calculation is unclear, send equipment weight, max payload and working environment to Juanmu for a free calculation.