How to measure the 0.75% chain-wear limit: a chain-checker walkthrough
Chain wear is pitch elongation: on 11/12-speed drivetrains replace at 0.75% stretch or the cassette and chainrings wear out with it. A three-step chain-checker walkthrough, 0.75% vs 1% thresholds, and checking intervals.
Short answer: chain "wear" is really pitch elongation - pins and rollers wear and the chain grows longer, not thinner. On 11/12-speed drivetrains the replacement threshold is 0.75%: ride past it and the elongated pitch grinds matching hooks into the cassette and chainrings, so the whole groupset goes together. A chain costs a fraction of a cassette - timely replacement is the cheapest maintenance there is.
Using a chain checker, in three steps
A chain checker has two bosses that drop into roller gaps: 1) hook the 0.75% end (or the 0.75-marked pin) into one end of a chain span; 2) let the gauge settle and tension the chain lightly; 3) see whether the far end drops fully into the opposite roller gap - a full drop means 0.75% elongation and time for a new chain; if it rests on top of the rollers you are still in the safe zone. Judge on the 0.75% end alone - by the time the 1.0% end drops in, the cassette has usually been "trained" by the elongated pitch already.
0.75% vs 1%
The two thresholds match different drivetrains: 12/11/10-speed cassette systems use 0.75% (fine teeth, low tolerance); single-speed, internal-gear hubs and many 8/9-speed systems use 1%. When unsure, follow the drivetrain maker's manual. eBikes stretch chains faster because of motor torque - check more often even on e-bike specific chains such as the e12 Turbo, still by the same 0.75% standard.
Interval and record
Check roughly every 500 km, and after wet or muddy rides; always measure the same span (link 3-5 at the cassette side wears fastest). Measure a new chain once as a baseline and compare at the same spot for continuity. Care notes for the X12 12-speed series and other KMC ranges ship with the product documents - defer to the original manuals.
If you're unsure whether the chain is near the threshold, send drivetrain photos to Juanmu for a second opinion, or contact Juanmu to arrange an inspection.